Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Midland, NC
Chimney repair is the job Midland calls us about most, and it’s rarely a simple patch. Many homes around here heat with wood through a long Piedmont winter, and a good number of those fireplaces and wood stoves vent through old masonry flues that were built without a liner. That combination is what makes Midland chimney work different from the suburbs: the flue has been worked hard and it may never have had the protection a modern liner provides. We handle the inspection, the cleaning, the repair, and the dryer vent under one appointment. Call (855) 412-0975 for a free estimate.
Why Midland Homes Are Different
Midland sits semi-rural in Cabarrus County, spread out on large lots off NC-24 and NC-601, and the housing reflects that. You’ll find older farmhouse-style homes and ranch houses, manufactured homes, and newer builds on acreage in rural subdivisions, and each one brings a different chimney question. The older properties often have masonry fireplaces, sometimes with a freestanding wood stove added later. The newer rural-subdivision homes may run factory-built prefab chimney systems, which get swept a different way than masonry. The Piedmont climate drives the rest: cool-to-cold winters with occasional ice and a burn season that stretches from autumn well into spring. People here burn for heat, not atmosphere. That means creosote accumulates fast and steadily, and a fireplace or stove that only gets looked at every few years is working on borrowed time. Travel is part of the trade too. Properties are scattered, so scheduling a visit to 28107 takes a little planning rather than a quick hop between close-together neighborhoods.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Midland Services
Most Midland homeowners call us for one of two things: cleaning the flue they burn in, or clearing the dryer vent that quietly collects lint behind the wall.
Chimney Sweep in Midland
In Midland, a sweep is usually a creosote job. Wood stoves and wood-burning fireplaces that run hard all winter build up deposits that a decorative gas log setup never produces, and the older masonry flues common on rural Cabarrus properties make the inspection as important as the brushing itself. We sweep the flue and the firebox, check the damper and the cap, and look at what the flue is made of and whether it’s lined. If we find something, you see it before we recommend anything. Call (855) 412-0975 for a free estimate on a chimney sweep.
Dryer Vent Cleaning in Midland
The same properties that sit on acreage often have long dryer runs, sometimes through exterior walls or up through a second floor, and those are the runs where lint collects in ways a short suburban vent never does. We clear the whole line with professional tooling and Famco-compatible components, then show you what came out. It’s a fire-safety job, not a household chore, and it’s the second half of what we do here. Call (855) 412-0975 for a free estimate on dryer vent cleaning.
Chimney Repair in Midland
Chimney repair in Midland usually starts with a flue that was never lined, or a masonry stack that has spent years absorbing heat and moisture from steady wood burning. Older farmhouse and ranch properties around here often vent a stove or fireplace through plain brick with no liner protecting it from the flue gases. Add the Piedmont’s long burn season and freeze-and-thaw winters, and mortar joints, crowns, and caps take a beating. Our chimney repair work is built around fixing what the inspection actually shows, using professional-grade materials like HeatShield for resurfacing and DuraFlex for relining, so you’re not handed off to a mason when damage turns up.
Chimney Liner Installation
Signs you need it
An unlined clay or brick flue, cracked or missing clay tiles, or a wood stove that was tied into an old fireplace chimney all point to a liner that needs to go in.
What it costs in Midland
Liner installation typically runs $1,800 to $4,500, depending on the flue size, the length of the run, and whether a full stainless liner is needed or an in-place HeatShield resurfacing will do.
How we do it
We inspect the flue with a camera, measure the run, specify the right DuraFlex stainless liner or HeatShield resurfacing for the appliance, then install, insulate, and top it off with a proper cap and a photo record of the finished flue.
Chimney Crown Repair
Signs you need it
A crown with visible cracks, crumbling mortar at the top of the stack, or water stains on the firebox ceiling after rain all mean the crown isn’t shedding water the way it should.
What it costs in Midland
Crown repair typically runs $350 to $1,200, with simple crack sealing at the lower end and a full crown rebuild on a large masonry stack at the upper end.
How we do it
We clear the old cracked material, re-form the crown with a proper overhang and slope away from the flue, and seal it so water runs off instead of soaking into the masonry below.
Chimney Cap Installation
Signs you need it
An open flue that lets rain, animals, or debris straight down into the chimney is the clearest sign a cap is missing.
What it costs in Midland
Cap installation typically runs $250 to $700 depending on the size of the flue and the style of cap specified for your chimney.
How we do it
We measure the flue opening, fit a stainless or copper cap sized to the flue, and secure it to the crown so it stays put through Piedmont wind and ice.
Chimney Flashing Repair
Signs you need it
Rusted or lifted flashing, a damp patch on the ceiling near the chimney, or daylight visible where the chimney meets the roof line all point to flashing that needs attention.
What it costs in Midland
Flashing repair typically runs $300 to $950, with a simple reseal at the lower end and a full replacement of the flashing system at the upper end.
How we do it
We lift the existing flashing, rework the step and counter-flashing, seal the joints against the masonry, and check the surrounding shingles so water has a clear path away from the chimney.
What Chimney Repair Costs in Midland
These are typical ranges for the work we quote most often around Midland. Every price is confirmed in the written estimate before we begin.
| Item | Typical range in Midland |
|---|---|
| Chimney liner installation | $1,800 – $4,500 |
| Chimney crown repair | $350 – $1,200 |
| Chimney cap installation | $250 – $700 |
Do I really need a new liner if my chimney is unlined?
An unlined flue gives creosote and heat a direct path into the masonry, so yes, an unlined or damaged flue generally needs a liner or resurfacing before it’s safe to keep burning. We’ll show you the camera footage before recommending anything. Call (855) 412-0975 for a free estimate.
How long does chimney repair take in Midland?
Most repairs are a one-day job, while a full liner installation usually takes longer once the flue is measured and the materials are sized. We’ll give you a realistic timeline in the written estimate so you can plan around the burn season.
Brands We Service in Midland
We work with the professional-grade lines that certified chimney professionals specify: DuraFlex for stainless relining, HeatShield for flue resurfacing, Copperfield for caps and chimney components, Olympia Chimney and Gelco, and Famco-compatible parts for dryer vent work. We stock what we need for most repairs, so turnaround is measured in days rather than weeks. You can see our brands here.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Midland, NC
| Service | Typical range in Midland |
|---|---|
| Chimney sweep and inspection | $180 – $350 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney crown repair | $350 – $1,200 |
| Chimney cap installation | $250 – $700 |
| Chimney cap replacement | $250 – $700 |
| Chimney flashing repair | $300 – $950 |
| Dryer vent cleaning | $125 – $275 |
Price in Midland goes up mainly with the flue length, the amount of creosote or masonry damage, and whether a repair can be done in place with HeatShield or needs a full liner. You get the price upfront in writing, and the written estimate sets the final number.
Neighborhoods We Serve in Midland
We drive out to properties across Midland and the surrounding Cabarrus County area, from homes near the NC-24 and NC-601 corridors to the rural subdivisions and acreage lots spread between them. Because properties are scattered, we plan routes in advance so a visit here isn’t a last-minute detour. The ZIP code 28107 covers most of what we serve in and around town. If you’re on a large lot or a long rural drive, mention it when you call so we can put you on the right schedule.
- Properties along NC-24
- Properties along NC-601
- Rural-subdivision homes on acreage
- Older farmhouse and ranch properties around town
- Manufactured and prefab-chimney homes in the 28107 area
Service Area – Cities Near Midland
Midland sits between several communities we serve, and if you’re just outside our usual route we can still help. Neighboring homeowners call us from Locust, NC, Lake Park, NC, Charlotte, NC, and Enochville, NC. Each town brings its own mix of housing and chimney types, so mention your address when you call and we’ll confirm the visit. We’re glad to cover Midland and the towns around it under one appointment.
Serving Midland, NC – Our Local Coverage Area
We serve Midland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Midland
Midland sits on our regular Cabarrus County route, so we can usually schedule a visit within the same week. Call (855) 412-0975. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Many rural and newer-subdivision properties in Midland have HOA or deed restrictions, and structural chimney work usually requires a permit from the local building department. We’ll tell you what’s typically needed for your job, and you should confirm specifics with Cabarrus County or your HOA before work begins.
Yes. We cover the whole of Midland, including properties off NC-24 and NC-601 and the rural lots in the 28107 ZIP code, along with the nearby towns on our route. Call (855) 412-0975 for a free estimate and we’ll confirm your address.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Midland Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- David Wong"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Whitney Bennett"Good crew. Would use again."
- Angela Kim